Traditional Pull-on Davit

Innovative Pull-on dinghy davit System For Storage of Inflatable Boat Dinghies and Hard Shell Dinghies on Powerboats.

A high quality dinghy davit system that is easy to install and simple to use. "No expensive gluing of parts on your dinghy. No hassles, no worries....just go boating!"

  

 
See more pictures and videos on our sister website here.

The Traditional Dinghy Davit is economical yet tough and provides a simple solution for dinghy storage while gaining more room on your swim platform. This rugged hassle free system lets you lift and pull your dinghy on for easy storage or just push-off for launching. Easily mounted on the swim platform and can be installed while the vessel is in the water. 

• Constructed with light weight marine grade aluminum.

• 350 lb weight capacity. Keep in mind that as a dinghy gets heavier it gets harder to  pull up on your swim platform, so you may want to consider out H3O davit system which comes with a built-in winch system.

• Powder Coated to military spec’s.

• Multiple mount sizes to accommodate different size platforms.

• Cross-members to aide in retrieval and launching.

• Easy 3-point tie down system available.

• Economical yet rugged.

• Two year warranty.

 
See more pictures and videos on our sister website here.

These davits are designed for the boat owner who demands the best in function and style at a low cost. A simple solution for dinghy storage while retaining room on your swim platform. We offer different mounting systems to match almost any size swim platform.

 
See more pictures and videos on our sister website here.

The Traditional Dinghy Davit is electro-coated to military specs, constructed with lightweight marine grade aluminum, isolated stainless steel fasteners and hardware. All allowing for a highly durable system that weighs in at about 15 pounds. The skid-plates are made of polyethylene and will allow for easy scuff-free maneuvering.

• Cross members can be removed for independent cradle movement.

• By pulling the 2 pivot pins the davit is easily removed for storage while leaving a clutter free deck.

• Easily mounted on a swim platform. No major installations, no expensive and complex gluing, no hassles, no damage to dinghy, less expensive and will last forever!

• Other davit systems require gluing of parts, this system does not.

• The high gloss white powder coating is standard to better blend in with your dinghy and boat and not only looks great but adds years of extra life in harsh environments.

• Easily mounted on the swim platform, this hassle free system lets you lift and pull your dinghy on for easy storage or just push-off for launching. Always available in an emergency.

• Davit can be customized with a "Custom Optional Insert For Rib" to perfectly match the hull shape of your rib.  We will insert polyethylene blocks that can be cut by you to perfectly to match your Rib hull shape. This not only give you a custom fit, but also adds strength to your system.

• The difficultly of retrieval depends upon the weight of dinghy and height of your platform off the water.

• 350 lb weight capacity. Keep in mind that as a dinghy gets heavier it gets harder to  pull up on your swim platform, so you may want to consider out H3O davit system which comes with a built-in winch system.

See more details and pricing here.

 

• Easy to use, easy to remove.

• Made of marine grade high density polyethylene for strength.

• Multiple position adjusting chock system, adjusts to hull configuration

• Can be used for soft or rigid tenders.

• Adjustable cradle angles for easy deployment & retrieval.

• Easy 3-point tie down system available.

• Independent cradles with rollers.

• Each roller well has a weap hole for water to drain.

• Multiple mount sizes to accommodate different size platforms.

• 350 lb weight capacity. Keep in mind that as a dinghy gets heavier it gets harder to  pull up on your swim platform, so you may want to consider out H3O davit system which comes with a built-in winch system.

• Can be used on hydraulic swim platforms with existing channels to remove those ugly, dangerous chocks

• Weighs in at only 14 pounds.

• Two year warranty.

The difficultly of retrieval depends upon the weight of your dinghy and the height of your platform off the water. As a dinghy gets heavier it gets harder to  pull up on your swim platform, so you may want to consider our H3O davit system which comes with a built-in winch system.

See more pictures and videos on our sister website here.

If you have a lip on the outer edge of your platform, let us know how high it is and we will ship you free shims with your purchase.

Davit Systems require at least 3-points to tie the tender down.  One at the bow, one at the stern and another over the inboard pontoon.  More tie-downs can be added if needed! We’ve included pictures and illustrations below to help show you exactly how your dinghy davit should be tied down.

Let us know if you have any questions, we’re here to help!

See more details and pricing here.